View TGB2010-EPU-SM_1324830.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Advance Product Information
September 16, 2004
5GHz - 9GHz Packaged Bessel Filter
TGB2010-EPU-SM
Key Features and Performance * 5, 6, 6.5, 7.5, 8, 9 GHz and Thru Filters * <2.0ps Group Delay to Fo * Typical >15dB Return Loss to Fo * Filter Bandwidth 0.5 GHz * Package Dimensions: 2 x 2 x 0.90 mm
Primary Applications
* * High-Speed Optical Networks Filter Networks
Preliminary Measured Performance Product Description
The TGB2010 Bessel Filter has low inband return loss, low group delay variation, and a smaller package footprint than competing filters. Insertion loss and group delay for each filter matches an ideal 3rd order Bessel filter and is matched to 50 Ohms eliminating the need for additional components for multiple reflection management. A range of 5 to 9 GHz cutoff frequencies in 1GHz steps are available. The TGB2010 series package size is 2mm x 2mm allowing integration on tightly packed circuit boards.
0 -1 -2
5 GHz
-3 Gain (dB) -4 -5 -6 -7 -8 -9 -10 0 100
5 GHz
6 GHz 6.5 GHz 7.5 GHz 8 GHz 9 GHz
2
4
6 8 Frequency (GHz)
10
12
80
6 GHz
6.5 GHz
Evaluation Boards are available.
Group Delay (ps)
60
7.5 GHz 8 GHz 9 GHz
40
20
0 0 1 2 3 4 5 6 7 Frequency (GHz) 8 9 10 11
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice. 1
TriQuint Semiconductor Texas Phone: (972)994-8465 Fax: (972)994-8504 Email: info-mmw@tqs.com Web: www.triquint.com
Advance Product Information
September 16, 2004 TGB2010-EPU-SM TABLE I MAXIMUM RATINGS Symbol PIN Parameter Input Continuous Wave Power in-band out-of-band Assembly Temperature Storage Temperature Value 17 dBm 11 dBm 260 0C -65 to 150 0C Notes 1/
TASSY TSTG
1/
These ratings represent the maximum operable values for this device
TABLE II TGB2010-EPU-SM RF CHARACTERIZATION TABLE (TA = 25C, Nominal) Symbol Fo Tg RL5GHz RL6GHz RL6.5GHz RL7.5GHz RL8GHz RL9GHz Parameter 3dB Bandwidth (GHz) Group Delay Variation Within 3dB Bandwidth Return Loss Return Loss Return Loss Return Loss Return Loss Return Loss Test Conditions F = 5, 6, 6.5, 7.5, 8, 9 F=5-9 F = DC - 5 GHz F = DC - 6 GHz F = DC - 6.5 GHz F = DC - 7.5 GHz F = DC - 7 GHz F = DC - 7 GHz Typical 60.5 62.0 15 15 15 15 15 15 Units GHz pS dB dB dB dB dB dB Notes
Note: Table II Lists the RF Characteristics of typical devices as determined by fixtured measurements.
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice. 2
TriQuint Semiconductor Texas Phone: (972)994-8465 Fax: (972)994-8504 Email: info-mmw@tqs.com Web: www.triquint.com
Advance Product Information
September 16, 2004 TGB2010-EPU-SM
Measured Fixture Performance
0 -1 -2 -3 Gain (dB) -4 -5 -6 -7 -8 -9 -10 0 0 -5 Return Loss (dB) -10 -15 -20 -25 -30 0 1 2 3 4 5 6 7 8 Frequency (GHz) 9 10 11 12
5 GHz 6 GHz 6.5 GHz 7.5 GHz 8 GHz 9 GHz 5 GHz 6 GHz 6.5 GHz 7.5 GHz 8 GHz 9 GHz
2
4
6 8 Frequency (GHz)
10
12
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice. 3
TriQuint Semiconductor Texas Phone: (972)994-8465 Fax: (972)994-8504 Email: info-mmw@tqs.com Web: www.triquint.com
Advance Product Information
September 16, 2004 TGB2010-EPU-SM
Measured Fixture Performance
100
80 Group Delay (ps)
60
40
5 GHz 6 GHz 6.5 GHz 7.5 GHz 8 GHz 9 GHz
20
0 0 1 2 3 4 5 6 7 Frequency (GHz) 8 9 10 11
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice. 4
TriQuint Semiconductor Texas Phone: (972)994-8465 Fax: (972)994-8504 Email: info-mmw@tqs.com Web: www.triquint.com
Advance Product Information
September 16, 2004 TGB2010-EPU-SM
Package Pinout
Pin 1 2 3 4 5 6 7 (Paddle)
Signal NC Input NC NC Output NC Ground
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice. 5
TriQuint Semiconductor Texas Phone: (972)994-8465 Fax: (972)994-8504 Email: info-mmw@tqs.com Web: www.triquint.com
Advance Product Information
September 16, 2004 TGB2010-EPU-SM
Evaluation Board
Input
Output
Note: No external components required.
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice. 6
TriQuint Semiconductor Texas Phone: (972)994-8465 Fax: (972)994-8504 Email: info-mmw@tqs.com Web: www.triquint.com
Advance Product Information
September 16, 2004 TGB2010-EPU-SM
Packaged Dimensional Drawing TGB2010-EPU-SM
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice. 7
TriQuint Semiconductor Texas Phone: (972)994-8465 Fax: (972)994-8504 Email: info-mmw@tqs.com Web: www.triquint.com
Advance Product Information
September 16, 2004 TGB2010-EPU-SM
Assembly of a TGB2010-EPU Surface Mount Package onto a Circuit Board
Solders designated Pb-free such as SnAgCu have reflow temperatures which are higher than those required for Sn/Pb. Typical soldering temperatures are 20 to 30 degrees higher. The molding compound used in this package can withstand 260C peak temperatures. In addition, the molding compound is free of flame retardants defined by some regulations as hazardous.
1. Clean the circuit board or module with Acetone. Rinse with alcohol and DI water. Allow the circuit to fully dry. 2. To improve the RF performance, we recommend attaching the paddle on the bottom of the package using Pb free solder. 3. Apply Pb free solder to each circuit board pad and to the backside contact for the package. 4. Reflow using manufacturer recommended oven and solder profiles. 5. Clean the assembly with alcohol.
Ordering Information
PACKAGE PART NUMBER DESIGNATIONS Part No TGB2010-00-EPU-SM TGB2010-50-EPU-SM TGB2010-60-EPU-SM TGB2010-65-EPU-SM TGB2010-75-EPU-SM TGB2010-80-EPU-SM TGB2010-90-EPU-SM
Package Style MLF/QFN MLF/QFN MLF/QFN MLF/QFN MLF/QFN MLF/QFN MLF/QFN
Cutoff Frequency Thru 5.0 0.5 GHz 6.0 0.5 GHz 6.5 0.5 GHz 7.5 0.5 GHz 8.0 0.5 GHz 9.0 0.5 GHz
Note: Package marked with 2 digit center frequency and manufacturing week only.
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice. 8
TriQuint Semiconductor Texas Phone: (972)994-8465 Fax: (972)994-8504 Email: info-mmw@tqs.com Web: www.triquint.com

▲Up To Search▲

Price & Availability of TGB2010-EPU-SM

	To Download TGB2010-EPU-SM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .